Before diving in, carefully decide how you’d like your panels to be placed on your wall. We recommend sketching out your plan to get a better idea of how it will look. You can also use painters tape to temporarily create panels on your wall for a real life visual.

Save yourself time by preassembling all your panels to the sizes and orientation needed. To assemble, align profile to corner connector (included) and press firmly to snap into the channel. Repeat as needed.

Clean wall surface, allow to dry. Using your measuring tape and a level, measure & mark wall at the desired height of the panels. Next measure & mark spacing from the edge of the wall or corner.

Using either construction adhesive or brad nails attached to your wall. Temporarily use painters tape to hold panel in place while you work through the remaining panel installation.

Continue installing the remaining panels until your desired look is complete. To save time, measure and cut a wood block to your desired panel spacing for quick and consistent placement.

Caulk and smooth any seams as needed. Fill nail holes with wood filler, then sand smooth once dry. Finish with acrylic latex paint and primer for a complete, polished look.